Model
Vr-50
Vr-80
Vr-100
Vr-130
Vr-180
Vr-250
  • INJECTION UNIT
  • Calculated Injection Capacity
    cm3
    60
    80
    102
    104
    132
    163
    116
    147
    182
    180
    200
    265
    332
    392
    475
    570
    678
    871
    Actual shot weight PS
    grams
    58
    76
    97
    99
    125
    155
    110
    139
    173
    171
    190
    250
    315
    372
    451
    541
    644
    827
    Plasticizing capacity
    kg/hr
    40
    54
    68
    50
    64
    75
    50
    64
    75
    77
    86
    115
    111
    154
    191
    166
    198
    252
    Injection pressure-Max
    kgf/cm2
    2635
    2023
    1594
    2648
    2092
    1694
    2648
    2092
    1694
    2180
    1967
    1487
    2250
    1904
    1574
    2065
    1735
    1351
    Injection rate
    cm3/sec
    89
    116
    147
    109
    138
    170
    109
    138
    170
    132
    147
    196
    152
    181
    217
    283
    336
    432
    Screw duameter
    mm
    28
    32
    36
    32
    36
    40
    32
    36
    40
    38
    40
    46
    46
    50
    55
    55
    60
    68
    Screw L/D ratio
     
    22
    20.5
    18
    22
    20.5
    18
    22
    20.5
    18
    217
    20.5
    18
    22
    20
    18
    22
    20.5
    18
    Screw speed
    rpm
    10-400
    10-285
    10-285
    10-280
    10-200
    10-200
    Injection speed
    mm/sec
    145
    125
    125
    138
    91
    109
    Suck back force
    ton
    2
    1.7
    1.7
    5
    5
    8.4
    Screw stroke
    mm
    100
    130
    145
    160
    200
    240
    Screw motor torque
    kgm
    69
    100
    100
    95
    160
    210
    Nozzle stroke
    mm
    245
    260
    300
    340
    380
    450
    Nozzle contact force
    ton
    5
    5
    5
    5
    5
    7.9
    Temp. Control zones
    no.
    4
    4
    4
    4
    4
    4
    Total heating wattage
    Kw
    5.1
    6.15
    6.5
    7.1
    11.1
    15.5

  • CLAMPING UNIT
  • Clamping force
    ton
    50
    80
    100
    130
    180
    250
    Clamping system
    type
    Toggle
    Toggle
    Toggle
    Toggle
    Toggle
    Toggle
    Max. Clamp stroke
    mm
    270
    320
    360
    400
    470
    580
    Max. Open daylight
    mm
    590
    670
    790
    850
    970
    1130
    Mould close speed
    mm/sec
    712
    470
    353
    399
    356
    445
    Mould open speed
    mm/sec
    1100
    665
    550
    764
    707
    834
    Locatingring
    mm
    100/125
    100/125
    100/125
    100/125
    100/125
    150/160
    Min/Max mould thickness
    mm
    150-320
    150-350
    150-430
    150-450
    200-500
    250-550
    Platen dimensions (HxV)
    mm
    446x446
    510x510
    580x580
    630x630
    720x720
    820x820
    Tie-Bar distance(HxV)
    mm
    310x310
    360x360
    40x410
    460x460
    510x510
    610x610
    Tie-Bar diameter
    mm
    50
    60
    65
    70
    85
    100
    Ejector stroke
    mm
    60
    80
    80
    80
    140
    170
    Ejector force
    ton
    3.3
    4.1
    4.1
    4.1
    5.6
    8.5

  • GENERAL
  • Pump motor power
    Kw
    15
    18.5
    18.5
    22
    22
    37
    Pump output vol.
    l/min
    200
    220
    220
    330
    330
    450
    Cooling water regulator
    l/min
    30
    30
    30
    30
    30
    50
    Oiltank capacity
    litre
    230
    250
    250
    290
    290
    400
    Hydraulic sys.pressure
    kgf/cm2
    170
    170
    170
    170
    170
    170
    Machine weight
    ton
    2.7
    3.9
    4.8
    5.4
    6.2
    9.6
    Machine dimensions (LxWxH)
    cm
    386x116x222
    407x124x227
    434x132x234
    464x143x232
    553x148x248
    624x176x249
    * Specifications, technical information and dimensions are subject to charge without prior notice.