|
|
> > > > |
Vr-CE 80 (Euromap Platen Information) |
|
|
|
MODEL |
Vr-80 |
Injection Unit |
Calculated Injection Capacity |
cm3 |
104 |
132 |
163 |
Actual shot weight PS |
grams |
99 |
125 |
155 |
Plasticizing capacity |
kg/hr |
50 |
64 |
75 |
Injection pressure-Max |
kgf/cm2 |
2648 |
2092 |
1694 |
Injection rate |
cm3/sec |
109 |
138 |
170 |
Screw duameter |
mm |
32 |
36 |
40 |
Screw L/D ratio |
|
22 |
20.5 |
18 |
Screw speed |
rpm |
10-285 |
Injection speed |
mm/sec |
125 |
Suck back force |
ton |
1.7 |
Screw stroke |
mm |
130 |
Screw motor torque |
kgm |
100 |
Nozzle stroke |
mm |
260 |
Nozzle contact force |
ton |
5 |
Temp. Control zones |
no. |
4 |
Total heating wattage |
Kw |
6.15 |
Clamping Unit |
Clamping force |
ton |
80 |
Clamping system |
type |
Toggle |
Max. Clamp stroke |
mm |
320 |
Max. Open daylight |
mm |
670 |
Mould close speed |
mm/sec |
470 |
Mould open speed |
mm/sec |
665 |
Locatingring |
mm |
100/125 |
Min/Max mould thickness |
mm |
150-350 |
Platen dimensions (HxV) |
mm |
510x510 |
Tie-Bar distance(HxV) |
mm |
360x360 |
Tie-Bar diameter |
mm |
60 |
Ejector stroke |
mm |
80 |
Ejector force |
ton |
4.1 |
General |
Pump motor power |
Kw |
18.5 |
Pump output vol. |
l/min |
220 |
Cooling water regulator |
l/min |
30 |
Oiltank capacity |
litre |
250 |
Hydraulic sys.pressure |
kgf/cm2 |
170 |
Machine weight |
ton |
3.9 |
Machine dimensions (LxWxH) |
cm |
407x124x227 |
* Specifications, technical information and dimensions are subject to charge without prior notice. |
|
|
|
|
| |
|
|
|
|