|
|
> > > > |
Vr-CE 50 (Euromap Platen Information) |
|
|
|
MODEL |
Vr-50 |
Injection Unit |
Calculated Injection Capacity |
cm3 |
60 |
80 |
102 |
Actual shot weight PS |
grams |
58 |
76 |
97 |
Plasticizing capacity |
kg/hr |
40 |
54 |
68 |
Injection pressure-Max |
kgf/cm2 |
2635 |
2023 |
1594 |
Injection rate |
cm3/sec |
89 |
116 |
147 |
Screw duameter |
mm |
28 |
32 |
36 |
Screw L/D ratio |
|
22 |
20.5 |
18 |
Screw speed |
rpm |
10-400 |
Injection speed |
mm/sec |
145 |
Suck back force |
ton |
2 |
Screw stroke |
mm |
100 |
Screw motor torque |
kgm |
69 |
Nozzle stroke |
mm |
245 |
Nozzle contact force |
ton |
5 |
Temp. Control zones |
no. |
4 |
Total heating wattage |
Kw |
5.1 |
Clamping Unit |
Clamping force |
ton |
50 |
Clamping system |
type |
Toggle |
Max. Clamp stroke |
mm |
270 |
Max. Open daylight |
mm |
590 |
Mould close speed |
mm/sec |
712 |
Mould open speed |
mm/sec |
1100 |
Locatingring |
mm |
100/125 |
Min/Max mould thickness |
mm |
150-320 |
Platen dimensions (HxV) |
mm |
446x446 |
Tie-Bar distance(HxV) |
mm |
310x310 |
Tie-Bar diameter |
mm |
50 |
Ejector stroke |
mm |
60 |
Ejector force |
ton |
3.3 |
General |
Pump motor power |
Kw |
15 |
Pump output vol. |
l/min |
200 |
Cooling water regulator |
l/min |
30 |
Oiltank capacity |
litre |
230 |
Hydraulic sys.pressure |
kgf/cm2 |
170 |
Machine weight |
ton |
2.7 |
Machine dimensions (LxWxH) |
cm |
386x116x222 |
* Specifications, technical information and dimensions are subject to charge without prior notice. |
|
|
|
|
| |
|
|
|
|