|
|
> > > > |
Vr-CE 250 (Euromap Platen Information) |
|
|
|
MODEL |
Vr-250 |
Injection Unit |
Calculated Injection Capacity |
cm3 |
570 |
678 |
871 |
Actual shot weight PS |
grams |
541 |
644 |
827 |
Plasticizing capacity |
kg/hr |
166 |
198 |
252 |
Injection pressure-Max |
kgf/cm2 |
2065 |
1735 |
1351 |
Injection rate |
cm3/sec |
283 |
336 |
432 |
Screw duameter |
mm |
55 |
60 |
68 |
Screw L/D ratio |
|
22 |
20.5 |
18 |
Screw speed |
rpm |
10-200 |
Injection speed |
mm/sec |
109 |
Suck back force |
ton |
8.4 |
Screw stroke |
mm |
240 |
Screw motor torque |
kgm |
210 |
Nozzle stroke |
mm |
450 |
Nozzle contact force |
ton |
7.9 |
Temp. Control zones |
no. |
4 |
Total heating wattage |
Kw |
15.5 |
Clamping Unit |
Clamping force |
ton |
250 |
Clamping system |
type |
Toggle |
Max. Clamp stroke |
mm |
580 |
Max. Open daylight |
mm |
1130 |
Mould close speed |
mm/sec |
445 |
Mould open speed |
mm/sec |
834 |
Locatingring |
mm |
150/160 |
Min/Max mould thickness |
mm |
250-550 |
Platen dimensions (HxV) |
mm |
820x820 |
Tie-Bar distance(HxV) |
mm |
610x610 |
Tie-Bar diameter |
mm |
100 |
Ejector stroke |
mm |
170 |
Ejector force |
ton |
8.5 |
General |
Pump motor power |
Kw |
37 |
Pump output vol. |
l/min |
450 |
Cooling water regulator |
l/min |
50 |
Oiltank capacity |
litre |
400 |
Hydraulic sys.pressure |
kgf/cm2 |
170 |
Machine weight |
ton |
9.6 |
Machine dimensions (LxWxH) |
cm |
624x176x249 |
* Specifications, technical information and dimensions are subject to charge without prior notice. |
|
|
|
|
| |
|
|
|
|