|
|
> > > > |
| Vr-CE 180 (Euromap Platen Information) |
|
|
|
MODEL |
Vr-180 |
| Injection Unit |
Calculated Injection Capacity |
cm3 |
332 |
392 |
475 |
Actual shot weight PS |
grams |
315 |
372 |
451 |
Plasticizing capacity |
kg/hr |
111 |
154 |
191 |
Injection pressure-Max |
kgf/cm2 |
2250 |
1904 |
1574 |
Injection rate |
cm3/sec |
152 |
181 |
217 |
Screw duameter |
mm |
46 |
50 |
55 |
Screw L/D ratio |
|
22 |
20 |
18 |
Screw speed |
rpm |
10-200 |
Injection speed |
mm/sec |
91 |
Suck back force |
ton |
5 |
Screw stroke |
mm |
200 |
Screw motor torque |
kgm |
160 |
Nozzle stroke |
mm |
380 |
Nozzle contact force |
ton |
5 |
Temp. Control zones |
no. |
4 |
Total heating wattage |
Kw |
11.1 |
Clamping Unit |
Clamping force |
ton |
180 |
Clamping system |
type |
Toggle |
Max. Clamp stroke |
mm |
470 |
Max. Open daylight |
mm |
970 |
Mould close speed |
mm/sec |
356 |
Mould open speed |
mm/sec |
707 |
Locatingring |
mm |
100/125 |
Min/Max mould thickness |
mm |
200-500 |
Platen dimensions (HxV) |
mm |
720x720 |
Tie-Bar distance(HxV) |
mm |
510x510 |
Tie-Bar diameter |
mm |
85 |
Ejector stroke |
mm |
140 |
Ejector force |
ton |
5.6 |
General |
Pump motor power |
Kw |
22 |
Pump output vol. |
l/min |
330 |
Cooling water regulator |
l/min |
30 |
Oiltank capacity |
litre |
290 |
Hydraulic sys.pressure |
kgf/cm2 |
170 |
Machine weight |
ton |
6.2 |
Machine dimensions (LxWxH) |
cm |
553x148x248 |
| * Specifications, technical information and dimensions are subject to charge without prior notice. |
|
|
|
|
|
|
| |
|
|
|
|
