|
|
> > > > |
Vr-CE 130 (Euromap Platen Information) |
|
|
|
MODEL |
Vr-130 |
Injection Unit |
Calculated Injection Capacity |
cm3 |
180 |
200 |
265 |
Actual shot weight PS |
grams |
171 |
190 |
250 |
Plasticizing capacity |
kg/hr |
77 |
86 |
115 |
Injection pressure-Max |
kgf/cm2 |
2180 |
1967 |
1487 |
Injection rate |
cm3/sec |
132 |
147 |
196 |
Screw duameter |
mm |
38 |
40 |
46 |
Screw L/D ratio |
|
217 |
20.5 |
18 |
Screw speed |
rpm |
10-280 |
Injection speed |
mm/sec |
138 |
Suck back force |
ton |
5 |
Screw stroke |
mm |
160 |
Screw motor torque |
kgm |
95 |
Nozzle stroke |
mm |
340 |
Nozzle contact force |
ton |
5 |
Temp. Control zones |
no. |
4 |
Total heating wattage |
Kw |
7.1 |
Clamping Unit |
Clamping force |
ton |
130 |
Clamping system |
type |
Toggle |
Max. Clamp stroke |
mm |
400 |
Max. Open daylight |
mm |
850 |
Mould close speed |
mm/sec |
399 |
Mould open speed |
mm/sec |
764 |
Locatingring |
mm |
100/125 |
Min/Max mould thickness |
mm |
150-450 |
Platen dimensions (HxV) |
mm |
630x630 |
Tie-Bar distance(HxV) |
mm |
460x460 |
Tie-Bar diameter |
mm |
70 |
Ejector stroke |
mm |
80 |
Ejector force |
ton |
4.1 |
General |
Pump motor power |
Kw |
22 |
Pump output vol. |
l/min |
330 |
Cooling water regulator |
l/min |
30 |
Oiltank capacity |
litre |
290 |
Hydraulic sys.pressure |
kgf/cm2 |
170 |
Machine weight |
ton |
5.4 |
Machine dimensions (LxWxH) |
cm |
464x143x232 |
* Specifications, technical information and dimensions are subject to charge without prior notice. |
|
|
|
|
| |
|
|
|
|